La crosse alerts pws software

All of our atomic products are calibrated daily by the National Institute of Standards and Technology to ensure we are delivering the most precise time to our customers. Our new Remote Monitoring Color Weather Station features precise indoor and outdoor temperature and humidity readings, dynamic forecast icons, and a new Wi-Fi connected option, which will allow you to see all of your sensor data in our new La Crosse View app.

Illuminate your bedroom with your favorite solid color, a vibrant color gradient, or cycle through all the color options. Use the Comfort Meter Mode to help achieve an ideal sleeping environment and the Guided Breathing Mode to help you unwind and relax. Close menu. La Crosse View. Product Registration.

Technical Support. Customer Service. Log in. These sensors can not be calibrated. No, you can not have more then one e-mail or phone number for text messages receive alerts. In the App approximately readings are stored. This is based on interval settings. Interval settings can be found under Setting in your account.

Interval setting options are 5, 10, 15, 30, 45 or 60 minutes. If more data is desired change to a browser. In a Browser two weeks of data will be stored, no matter the interval settings. This data can be exported to a. Verify you have alerts configured. If you have an alert set you should see a green check mark next to the reading you set Alert on. Add alerts lacrossetechnology.

Need More Help? Contact Us Here. Unable to register gateway Unable to register gateway Gateway Registration During the set up process you may experience trouble registering your gateway. Start by: Performing a factory reset. After completing a factory reset you do not receive four red blinks within 30 seconds, what are the lights on your gateway doing? If the gateway does not exist in your account contact us by using the contact support button at the bottom of this page, please include your gateway serial number and username on the account.

Unable to register sensor Unable to register sensor Sensor Registration During the set up process you may experience trouble registering your sensor. Start by: Place the registered gateway and sensor within 3 - 5 feet of each other.

Remove the batteries from the sensor. Press the gray button on the sensor 25 times. Place new batteries in the sensor. Be sure to use a new, Brand Name Alkaline battery dated at least 7 years in advance super, ultra, max, heavy duty and rechargeable types should be avoided. Place the batteries back into the remote sensor; making sure they are installed according to polarity. R11 or R22 should read on the LCD display for a couple of seconds followed by a 1 or dashes.

If you see the temperature on the LCD display press and hold the gray button on the sensor for about 15 - 20 seconds until you see Unplug the AC adaptor from the gateway for 15 seconds and then plug it back in. Once the red light on the gateway is solid, go to your account and select Register New Sensor. If the light on the gateway is not solid red what is the light doing? Firmly press and release the gray button on the gateway.

Firmly press and release the gray button on the sensor. The sensor should start counting for about 10 - 20 seconds. Example , , Once you see the temperature on the LCD display select 'Submit" in the app or website.

If you do not see the temperature on the LCD display repeat steps 8 - Although this may not be typical these steps may need to be repeated 3 - 4 times.

If there are other sensors connected and working with this gateway and you are unable to register this sensor contact us by using the contact support button at the bottom on the page. If there are no other sensors registered to this gateway delete the gateway from your account, factory reset the gateway and re-register the gateway. If you are still having troubles registering your sensor please contact us by using the contact support button at the bottom of the page.

Unable to register weather station Unable to register weather station Weather Station Registration During the set up process you may experience trouble registering your weather station. If your gateway has been seen in the last couple of minutes: Press and hold the set button for 3 - 5 seconds until "Lcd" appears on the display. Press and release the set button 20 times until the display reads "Res Off". Press the up arrow button until the display reads "Res Lo". Press the set button and the device will quickly reset the internet connection.

Return to the app and try to register the weather station again. If your weather station has not been seen recently: 1. Select Settings. Select Delete Sensor and confirm. Repeat for all weather stations and sensors registered to the gateway. Select the correct gateway serial number by comparing to the physical gateway. If no response, clear registration in the display: Press and hold the SET button until "Lcd" appears approx. Press the SET button and the device will reset.

Resync the display again as instructed in the information screen. If the PWS Device still won't sync properly, see the support documentation for more tips. If the beep does not occur, Register by Pressing continue, but Check to make sure the Time changed to Your specified Timezone. Regardless, first data may take up to 2 hours on all weather stations.

User Name Updated. Password Updated. Timezone Updated. Email Updated. Telephone Updated. Units Updated. Devices Logout. Register Home. Gateway Registration. Firmly Push Button. Your gateway is registered!!! What do you want to do next? Sensor Registration. Click here if not. If the sensor is already displays a temperature Click here for factory reset instructions. Step 1: Insert batteries then firmly press the sensor button and release. Wait for 3 seconds. Step 2: Firmly push and release the Gateway Button.

Your device was registered! It may take a few minutes for data to start showing, Please identify if you are a barracuda customer and Optionally give a proper name for your new sensor. Are you a "Barracuda"customer? Yes No. Name you sensor?